Create Plus Modpack
作者：rebot | 分类：整合包
Minecraft 版本： 1.20.1
平台： fabric
标签： lightweight optimization technology
Create Plus Modpack
ZH
简介
这是一个以机械动力为主的轻量级整合包，适用于1.20.1Forge和Fabric。
偶尔会更新
计划支持
| forge | fabric | neoforge | |
|---|---|---|---|
| 1.21 | 待机械动力支持1.21forge后将会支持 | 待机械动力支持1.21fabric后将会支持 | 待机械动力支持1.21neoforge后将会支持 |
| 1.20.2~1.20.6 | 因机械动力无计划支持1.20.2~1.20.6所以不支持 | 因机械动力无计划支持1.20.2~1.20.6所以不支持 | 因机械动力无计划支持1.20.2~1.20.6所以不支持 |
| 1.20.1 | 完全支持 | 完全支持 | 完全支持 |
| 1.19.3&4 | 因机械动力无计划支持1.19.3&4所以不支持 | 因机械动力无计划支持1.19.3&4所以不支持 | |
| 1.19.2 | 未来可能支持 | 未来可能支持 | |
| 1.18.2及以下 | 无支持计划 | 无支持计划 |
帮助
怎么安装？
整合包后缀为mrpack格式，直接将文件导入到启动器就行。
许可证
许可证未来可能为MIT，目前暂无许可证。
特点
-
修改了默认设置，将渲染距离和模拟距离改为6。
-
关掉了垂直同步，并将帧率最大值拉到无限制。
-
将Xaero's Minimap的地图位置放到了右上角，避免与帧率叠加。
-
左上角显示帧率和坐标。
-
按C键可以放大（有动画），鼠标滚轮来设置放大倍率。
-
等其他的设置（自己看）...
优化效果
实测，作者的i5-6200渣机平均100FPS+。
注
github上的备用下载源只包含1.1.0及以上版本。
整合包版本
1.x.x ## 1.0.0 一切的开端。
EN
Introduction
This is a lightweight modpack mainly based on mechanical power, suitable for 1.20.1 Forge and Fabric.
It will be updated occasionally.
Planned Support
| forge | fabric | neoforge | |
|---|---|---|---|
| 1.21 | Will be supported after create supports 1.21 forge | Will be supported after create supports 1.21 fabric | Will be supported after create supports 1.21 fabric |
| 1.20.2~1.20.6 | Not supported due to no plans for create to support 1.20.2~1.20.6 | Not supported due to no plans for create to support 1.20.2~1.20.6 | Not supported due to no plans for create to support 1.20.2~1.20.6 |
| 1.20.1 | Fully supported | Fully supported | Fully supported |
| 1.19.3&4 | Not supported due to no plans for create to support 1.19.3&4 | Not supported due to no plans for create to support 1.19.3&4 | |
| 1.19.2 | May be supported in the future | May be supported in the future | |
| 1.18.2 and below | No plans to support | No plans to support |
Help
How to install?
The modpack is in mrpack format, just import the file into the launcher.
License
The license may be MIT in the future, currently there is no license.
Features
- Modified default settings, changed render distance and simulation distance to 6.
- Turned off vertical sync and set the maximum frame rate to unlimited.
- Placed the map position of Xaero's Minimap in the upper right corner to avoid overlapping with the frame rate.
- Display frame rate and coordinates in the upper left corner.
- Press the C key to zoom in (with animation), use the mouse wheel to set the zoom level.
- Other settings (check them yourself)...
Optimization Effect
Tested, the author's i5-6200 low-end machine averages 100FPS+.
Note:
The backup download sources on GitHub only include versions 1.1.0 and above.
Modpack Version
1.x.x ## 1.0.0 The beginning of everything.请登录后举报
暂无评论，抢个沙发吧~